HP ProLiant BL685c Generation 7 Quickspecs Download

Page: 2 / 39

4. Up to four (4) Multi-Core AMD Opteron™ 6100 Series

processors

8. Two (2) small form factor (SFF) hot plug drive bays

What's New

Support for HP 16GB and 32GB Dual Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9 LP Memory Kit
Support for SATA Hot Plug 2.5" Enterprise Mainstream Solid State Drives

At A Glance

This document covers the HP ProLiant BL685c G7 server blade only. For more information on HP BladeSystem c-Class Enclosures
and HP BladeSystem c-Class Interconnect and Mezzanine Components, please see the following:

HP BladeSystem c3000 Enclosure QuickSpecs:

http://h18000.www1.hp.com/products/quickspecs/12790_na/12790_na.html

HP BladeSystem c7000 Enclosure QuickSpecs:

http://h18000.www1.hp.com/products/quickspecs/12810_na/12810_na.html

HP BladeSystem c-Class Interconnect and Mezzanine Components:

http://h18004.www1.hp.com/products/blades/components/c-class-interconnects.html
http://h18004.www1.hp.com/products/blades/components/c-class-adapters.html

The BL685c G7 helps simplify network connections, lower infrastructure costs, and delivers cost-effective, scalable, dense four-
processor performance for virtualization and compute-intensive database applications.

HP ProLiant BL685c G7 server blade includes:

Processor

Processor:

Up to four (4) Multi-Core AMD Opteron™ 6100 Series processors

Twelve-Core supports up to 2.3 GHz; 512 KB Level 2 cache memory per core; 12 MB Level 3 cache
Eight-Core supports up to 2.6 GHz; 512 KB Level 2 cache memory per core; 12 MB Level 3 cache

AMD SR5690 and SP5100 chipsets

Memory

Memory:

Thirty-two (32) DIMM slots
Up to 1TB of PC3L-8500 DDR3 Registered (RDIMM) memory, operating at 1066 MHz or at 800 MHz when fully
populated at 2 DIMMs per channel in 32 slots
Up to 256GB of PC3-10600 DDR3 Registered (RDIMM) memory, operating at 1333 MHz when fully populated at 2
DIMMs per channel in 32 slots
Supporting memory interleaving (2:1)

NOTE:

NOTE: Each processor memory bus will operate at up to 1333 MHz with either one quad-rank (QR) or two single-
rank/dual-rank (SR/DR) DIMMs per processor memory channel and 1066 MHz with up to two QR or one QR and one
SR/DR DIMMs per processor memory channel with standard voltage (1.5V, PC3) DIMMs. Memory bus will operate one
speed slower when low voltage (1.35V, PC3L) memory is installed. Memory bus speeds may be further limited by the
speed of the memory used as well.

Storage Controller

Storage Controller:

Smart Array P410i RAID controller with 1GB flash backed write cache (FBWC). Supports RAID 0,1.

NOTE:

NOTE: The HP Smart Array P410i controller is required for all blades that support hot plug drives. See Factory
Integrated Models section for more information.

Internal Drive Support

Internal Drive Support:

Up to two (2) small form factor (SFF) SAS or SATA hot plug hard disk drives or SATA solid state drives

Network Controller

Network Controller:

Two (2) integrated NC551i Dual Port FlexFabric 10Gb Converged Network Adapters supporting stateless TCP/IP

QuickSpecs

HP ProLiant BL685c Generation 7 (G7) Server Blade

Overview

DA - 13655 North America — Version 19 — September 26, 2011

Page 2