7.
Access the HP ProLiant Storage Server using the LO100 Remote Console functionality. Log on to
the HP ProLiant Storage Server with the default user name
administrator
and the password
hpinvent
. The HP ProLiant Storage Server Management console starts automatically.
NOTE:
When the Remote Console feature is enabled, you can get access to the storage server's
login screen.
The Lights-Out 100 port comes with factory default settings, which the administrator can change. See
the
HP ProLiant Lights-Out 100 Remote Management User Guide
for information about changing these
settings. To obtain this guide, go to
http://www.hp.com/support/manuals
, navigate to the servers
section, and select
Server management
. In the Server Management Software section, select
HP
Lights-Out 100i (LO100i) Software
.
Using the Integrated Lights-Out 2 method
Integrated Lights-Out 2 (iLO 2) is HP's fourth generation of Lights-Out management technology that
allows you to perform virtually any system administrator or maintenance task remotely as if you were
using its keyboard; mouse; monitor; power button; and floppy, CD or USB key, whether or not the
server is operating. It is available in two forms, iLO 2 Standard and iLO 2 Advanced. iLO 2 Standard
provides basic system board management functions, diagnostics and essential Lights-Out functionality
on supported ProLiant servers. iLO 2 Advanced provides advanced remote administration functionality
as a licensed option, which is included with the ProLiant Storage Server.
The Integrated Lights-Out port on the storage server can be configured through the Rapid Startup
Wizard or through the iLO 2 ROM-Based Setup Utility (RBSU). SNMP is enabled and the Insight
Management Agents are preinstalled.
The HP iLO 2 management processor provides multiple ways to configure, update, operate, and
manage servers remotely. The HP ProLiant Storage Server comes preconfigured with iLO 2 default
factory settings including a default user account and password. These settings can be found on the
iLO 2 Default Network Settings tag on the front of the server. If iLO 2 is connected to a network
running DNS and DHCP, you can use it immediately without changing any settings.
For more information on using HP iLO 2, see the
HP Integrated Lights-Out 2 User Guide
.
To quickly set up iLO 2 using the default settings for iLO 2 Standard and iLO 2 Advanced features on
DL380 G5, and DL585 G2 Storage Servers, follow these steps:
1.
Ensure that a network cable is connected to the iLO 2 port located on the back of the storage
server.
NOTE:
This connection method is easiest when the connection is to a DHCP and DNS supported
network.
2.
If you are not using dynamic DHCP (IP addressing), you will need to input a static IP address by
using the direct attach method and the iLO 2 RBSU.
HP ProLiant Storage Server
29
Summary of Contents for PROLIANT DL160 G5
