NOTE:
This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are
ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on
configurable product offerings and requirements.
NOTE:
Configure-to-order (CTO) servers must start with a CTO Chassis.
NOTE:
FIO indicates that this option is only available as a factory installable option.
Step 1: Base Configuration (choose one from each list unless otherwise noted)
HP Chassis
HP ProLiant e2000 G6 Configure-to-order Chassis
609326-B21
HP Drive Cage Options
HP 8 LFF DL2000 FIO Hard Drive Cage with Backplane Kit
611431-B21
HP 16 SFF Hard Drive Cage/Backplane DL2000 FIO Kit
611433-B21
HP 24 SFF Hard Drive Cage/Backplane DL2000 FIO Kit
611434-B21
NOTE:
for configurations with the 12 LFF HDD Cage, please contact your HP
representative.
HP Rail Kits
HP DL2000 Hardware Rail Kit
NOTE:
2U rail kit used for HP or 3rd party racks - allows addition of one e2000 chassis
at a time.
611428-B21
HP 10U Bulk Rail 2U Kit
NOTE:
10U rail kit used for HP racks ONLY - allows addition of five e2000 chassis at a
time.
612901-B21
HP Drive Cage Cable Kits
NOTE:
Required Drive Cage Cable kits for the DL2000. These cables connect the
midplane to the drive backplane and are based on the drive cage used and the number
of nodes.
2 Node 8LFF Configurations - order the following cables to connect the midplane to
the drive backplane:
HP Mini-SAS to SATA 20/25/29cm FIO Cable Kit
NOTE:
Quantity 1 per chassis.
612256-B21
HP Mini-SAS to SATA 25/20/29cm FIO Cable Kit
NOTE:
Quantity 1 per chassis.
612257-B21
HP Mini-SAS to SAS 160mm A FIO Cable Kit
NOTE:
Quantity 1 per chassis.
630874-B21
HP Mini-SAS to Mini-SAS 33cm FIO Cable Kit
NOTE:
Quantity 1 per chassis.
612255-B21
2 Node 16SFF Configurations - order the following cables to connect the midplane
to the drive backplane:
HP Mini-SAS to Mini-SAS 25cm FIO Cable Kit
NOTE:
Quantity 1 per chassis.
612254-B21
HP Mini-SAS to Mini-SAS 33cm FIO Cable Kit
NOTE:
Quantity 2 per chassis.
612255-B21
HP Mini-SAS 45cm FIO Cable Kit
NOTE:
Quantity 1 per chassis.
625805-B21
2 Node 24 SFF Configurations - order the following cables to connect the midplane
to the drive backplane:
HP Mini-SAS to Mini-SAS 25cm FIO Cable Kit
NOTE:
Quantity 4 per chassis.
612254-B21
QuickSpecs
HP ProLiant DL2000 Multi Node Server
Configuration Information - Factory Integrated Models
DA - 13847 North America — Version 31 — December 13, 2013
Page 18