• Consolidated health and service alerts with precise time stamps
• Agentless monitoring that does not affect application performance
For more information about the Active Health System, see the iLO user guide on the Hewlett Packard
Enterprise website.
Active Health System data collection
The Active Health System does not collect information about your operations, finances, customers,
employees, or partners.
Examples of information that is collected:
• Server model and serial number
• Processor model and speed
• Storage capacity and speed
• Memory capacity and speed
• Firmware/BIOS and driver versions and settings
The Active Health System does not parse or change OS data from third-party error event log activities (for
example, content created or passed through the OS).
Active Health System Log
The data collected by the Active Health System is stored in the Active Health System Log. The data is logged
securely, isolated from the operating system, and separate from customer data.
When the Active Health System Log is full, new data overwrites the oldest data in the log.
It takes less than 5 minutes to download the Active Health System Log and send it to a support professional
to help you resolve an issue.
When you download and send Active Health System data to Hewlett Packard Enterprise, you agree to have
the data used for analysis, technical resolution, and quality improvements. The data that is collected is
managed according to the privacy statement, available at
http://www.hpe.com/info/privacy
You can also upload the log to the Active Health System Viewer. For more information, see the Active Health
System Viewer documentation at the following website:
http://www.hpe.com/support/ahsv-docs
.
HPE iLO 5
iLO 5 is a remote server management processor embedded on the system boards of HPE ProLiant servers
and Synergy compute modules. iLO enables the monitoring and controlling of servers from remote locations.
iLO management is a powerful tool that provides multiple ways to configure, update, monitor, and repair
servers remotely. iLO (Standard) comes preconfigured on Hewlett Packard Enterprise servers without an
additional cost or license.
Features that enhance server administrator productivity and additional new security features are licensed. For
more information, see the iLO licensing guide at the following website:
http://www.hpe.com/support/ilo-
.
For more information about iLO, see the iLO user guide on the Hewlett Packard Enterprise website.
iLO Federation
iLO Federation enables you to manage multiple servers from one system using the iLO web interface.
When configured for iLO Federation, iLO uses multicast discovery and peer-to-peer communication to enable
communication between the systems in an iLO Federation group.
When an iLO Federation page loads, a data request is sent from the iLO system running the web interface to
its peers, and from those peers to other peers until all data for the selected iLO Federation group is retrieved.
Active Health System data collection
119
