Setup in the Configuration Fixture
4-6
HP ProLiant DL380 Generation 3 Packaged Cluster Setup and Installation Guide
HP CONFIDENTIAL
Writer: Woody Jernigan File Name: e-ch4 Setup in the Configuration Fixture
Codename: Sopwith Part Number: 252621-003 Last Saved On: 9/17/03 1:03 PM
5.
Set up and verify the MSA500 system and cluster operations.
Powering Down and Preparing for Transfer
1.
Shut down the operating system on each server and power off each server.
2.
Power off the storage system.
3.
Remove the power cords and return them to the original boxes.
4.
Disconnect the VHDCI SCSI cables and the Ethernet crossover cable from the
servers.
5.
Disconnect all other cables from the servers.
6.
Replace the protective covers on the ends of the VHDCI SCSI cables.
7.
Secure the VHDCI SCSI cables and the Ethernet crossover cable for transfer.
8.
Repack the shipping components in their original configuration. Refer to the
exploded view diagram and pictures on the packaged cluster poster as a guideline
for repacking.
Configuration is complete. The packaged cluster is ready for transfer.
