HP Common Slot Platinum Plus Power Supply Kits
NOTE:
The following Power Supplies offer 94% Efficiency with support for Intelligent
Power Discovery.
HP 460W Common Slot Platinum Plus Hot Plug Power Supply Kit
656362-B21
HP 750W Common Slot Platinum Plus Hot Plug Power Supply Kit
656363-B21
HP 1200W Common Slot Platinum Plus Hot Plug Power Supply Kit
656364-B21
HP Common Slot Gold Power Supplies
NOTE:
The following Power Supplies offer 92% efficiency.
HP 460W Common Slot Gold Hot Plug Power Supply Kit
503296-B21
HP 750W Common Slot Gold Hot Plug Power Supply Kit
512327-B21
HP Common Slot -48VDC Power Supplies
HP 750W Common Slot -48VDC Hot Plug Power Supply Kit
636673-B21
NOTE:
The HP 750W Common Slot -48VDC power supply does not ship with a power
cable. It has been designed with a terminal block connection allowing for custom design
of power cords by the user.
NOTE:
Option Kits for AC power supplies include the power supply and one PDU IEC
cable.
NOTE:
Power Specification and Technical Content for supported power supplies can be
found at:
http://h18000.www1.hp.com/products/quickspecs/14209_na/14209_na.html
Step 3: Choose Additional Factory Integratable Options (only one of the following from each
list unless otherwise noted)
HP Rack Kits
NOTE:
Rail kits are optional for Gen8 and are no longer included standard with the
server (except pre-configured Models). The customer has the choice to not include rail
kits with their server purchase, but it is recommended.
NOTE:
HP 2U Ball Bearing Rail Kits provide full serviceability of the server while in the
Rack and include a CMA. HP 2U Friction Rail Kits ARE NOT serviceable in the Rack and
must be removed from the rack and do not include CMA.
NOTE:
Additional HP Rack Kit options can be found in "Step 4: Additional Options, HP
Rack Options - Rail Kits" section of this QuickSpecs. Only FIO options are listed here.
NOTE:
To assist in the installation of the server into the rack an optional installation
tool is available by contacting your local services representative (p/n 695539-001).
Caution: HP recommends that a minimum of two people are required for all Rack Server
installations. Please refer to your installation instructions for proper tools and number
of people to use for any installation.
HP 2U Friction Gen8 Rail FIO Kit
NOTE:
No in-rack serviceability.
663476-B21
HP Insight Software
HP Insight Control including 1yr 24x7 Support ProLiant ML/DL/BL-bundle Single Server
FIO License
582765-B21
QuickSpecs
HP ProLiant DL385p Generation 8 (Gen8)
Configuration Information - Factory Integrated Models
DA - 14329 North America — Version 11 — December 4, 2012
Page 30
