92
HP ProLiant DL560 Server User Guide
Safety and Security Benefits
When you flash the system ROM, ROMPaq writes over the backup ROM and
saves the current ROM as a backup, enabling you to switch easily to the alternate
ROM version if the new ROM becomes corrupted for any reason. This feature
protects the existing ROM version, even if you experience a power failure while
flashing the ROM.
Access to Redundant ROM Settings
To access the redundant ROM through RBSU:
1. Access RBSU by pressing the
F9
key during powerup when the prompt is
displayed in the lower right corner of the screen.
2. Select
Advanced Options
.
3. Select
Redundant ROM Selection
.
4. Select one of the ROM banks as the system ROM.
5. Press
the
Enter
key.
6. Press
the
Esc
key to exit the current menu or press the
F10
key to exit
RBSU.
7. Restart the server.
To access the redundant ROM manually:
1. Power down the server ("Powering Down the Server" on page 29).
2. Remove the access panel ("Removing the Access Panel" on page 32).
3. Set positions 1, 5, and 6 of the system maintenance switch to On.
4. Install the access panel ("Installing the Access Panel" on page 32).
5. Power up the server ("Powering Up the Server" on page 29).
6. Wait for the server to emit two beeps.
7. Repeat steps 1 and 2.
8. Set positions 1, 5, and 6 of the system maintenance switch to Off.
9. Repeat steps 4 and 5.
HP CONFIDENTIAL
File Name: 303212-1new.doc Last Saved On: 11/4/02 10:51 AM
Summary of Contents for ProLiant DL560
