6
CAUTION:
After the cover is removed, do not touch the thermal interface media.
13.
Install the heatsink.
14.
Close the heatsink retaining bracket.
15.
Install DIMMs and DIMM fillers.
16.
Replace the processor memory airflow baffle.
17.
Install the processor memory cell into the server.
18.
Repeat steps 4 - 17 for all four processors.
19.
Power up the server.
20.
The installation is complete.
© Copyright 2008, 2009 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice. The only warranties for HP
products and services are set forth in the express warranty statements accompanying such products
and services. Nothing herein should be construed as constituting an additional warranty. HP shall
not be liable for technical or editorial errors or omissions contained herein.
Part Number AH233-9010C
September 2009 (Third Edition)
*AH233-9010C*
