Con
fi
guration Worksheet
Contact person
System administrator for the storage server. The
contact and location will be provided to any
SNMP management computer that requests them.
System location
Any text string, such as a location or phone
number. For example,
Floor #3, Financial
Services Bldg
.
Community name
No. 1
The community name is used for network
authentication when sending outgoing SNMP
messages.
Trap destination
No. 1
The IP address of a management computer that
will receive SNMP messages from the storage
server using the above community name.
Community name
No. 2
Same as above.
Trap destination
No. 2
Same as above.
Network Interfaces
(to be completed for non-DHCP con
fi
gurations)
Local area
connection 1
A local area connection is automatically created
for each network adapter that is detected.
IP address
An Internet Protocol (IP) address is assigned to the
server. If it is not automatically assigned, enter the
IP address that you want to assign to this server.
Subnet mask
A mask is used to determine what subnet an IP
address belongs to.
Default gateway
The gateway in a network that the network
adapter will use to access all other networks.
Local area
connection 2
Any additional local area connections can be
renamed to prevent confusion.
IP address
Same as above.
Subnet mask
Same as above.
Default gateway
Same as above.
iLO 2 settings
Change the host name, IP settings, and
administrator settings.
38
Con
fi
guring the server on the network
Summary of Contents for ProLiant ML350 G5
Page 12: ...12 About this guide ...
Page 18: ...18 Setup overview ...
Page 28: ...28 Installing the server ...
