HP ProLiant SL4540 Gen8, Quickspecs

Gen8. For additional information, please see the HP SmartMemory QuickSpecs at:

http://h18000.www1.hp.com/products/quickspecs/14225_ca/14225_ca.html

NOTE:

 HP certified SmartMemory must be used to guarantee full 1333MHz speeds.

NOTE:

 Depending on the memory configuration and processor model, the memory

speed may run at 1600, 1333MHz or 1066MHz. Please see the Online Memory
Configuration Tool at: 

www.hp.com/go/ddr3memory-configurator

Registered DIMMs (RDIMM) - For E5-2400 v2 Series Processors

NOTE:

 The Following memory is supported by E5-2400 v2 series processors

HP 4GB (1x4GB) Single Rank x4 PC3L-12800R (DDR3-1600) Registered CAS-11 Low
Voltage Memory Kit

713981-B21

HP 8GB (1x8GB) Single Rank x4 PC3L-12800R (DDR3-1600) Registered CAS-11 Low
Voltage Memory Kit

731765-B21

HP 8GB (1x8GB) Dual Rank x4 PC3L-12800R (DDR3-1600) Registered CAS-11 Low
Voltage Memory Kit

713983-B21

HP 16GB (1x16GB) Dual Rank x4 PC3L-12800R (DDR3-1600) Registered CAS-11 Low
Voltage Memory Kit

713985-B21

Registered DIMMs (RDIMM) - For E5-2400 Series Processors

NOTE:

 The Following memory is supported by E5-2400 series processors

HP 4GB (1x4GB) Single Rank x4 PC3L-10600R (DDR3-1333) Registered CAS-9 Low
Voltage Memory Kit

647893-B21

HP 8GB (1x8GB) Dual Rank x4 PC3L-10600R (DDR3-1333) Registered CAS-9 Low
Voltage Memory Kit

647897-B21

HP 16GB (1x16GB) Dual Rank x4 PC3L-10600R (DDR3-1333) Registered CAS-9 Low
Voltage Memory Kit

647901-B21

NOTE: 

A maximum of 12 DDR3 based memory slots are available on the node tray.

HP I/O Module

NOTE

: At least one I/O module must be selected per node. The HP ProLiant SL454x 1G

FIO Module Kit supports two (2) embedded 1Gb NICs. The HP SL454x 10G FIO Input
Output Module Kit supports two (2) embedded 1Gb NICs and two (2) embedded 10Gb
NICs with an optional InfiniBand upgrade.

NOTE: 

10 Gb Ethernet on the QSFP port requires the use of the QSFP to SFP+ (QSA)

adapter 655874-B21.

NOTE:

 IB supported with addition of HP IB Enablement Kit

HP SL454x 1G FIO Input Output Module Kit

664647-B21

HP SL454x 10G Input Output Module Kit

664648-B21

NOTE: 

Quantity of I/O module is 1 for every 1x60 model, 2 for every 2x25 model and 3

for every 3x15 model.

HP Storage Controllers

NOTE:

 Each node can support up to two of the P420i Gen8 storage controllers to

manage the LFF hard drives.

NOTE:

 Each node can support ONLY one HP SL4500 H220 HBA to manage the LFF hard

drives

NOTE:

 If two P420i Gen8 storage controllers are ordered, the HP SL454x Storage

Mezzanine to PCIe Enablement Kit cannot be ordered

NOTE:

 A cache module and the 12 inch Supercap kit must be selected per each P420i

ordered.

NOTE:

 Zero Memory cache option is not supported.

Host Bus Adapter

QuickSpecs

HP ProLiant SL4540 Generation 8 (Gen8) Server

Configuration Information - Factory Integrated Models

DA - 14406   Canada — Version 19 — June 10, 2014

Page  20