there are twelve (12) total available DIMM slots.
NOTE:
For the maximum supported memory speeds for each processor listed above,
please reference the 'Memory Speed by Processor Model' table in the Memory section
of the QuickSpecs.
NOTE:
HT indicates that the processor model supports Intel® Hyper-Threading
Technology.
NOTE:
Turbo indicates the maximum potential frequency increment when using Intel®
Turbo Boost Technology, with 8, 7, 6, 5, 4, 3, 2 or 1 core(s) active.
NOTE:
DDR3 speed is the maximum memory speed of the processor. Actual memory
speed may depend on the quantity and type of DIMMs installed.
NOTE:
Up to 2 processors supported. Mixing different processor models is not
supported.
NOTE:
For the Intel® C600 Chipset E5-2600 Series, the letter preceding the model
number indicates the Product Line (E3, E5, E7); 2600x, 2 = number of CPUs in a Node, 6
is socket/segment designation, 00 = Processor SKU, and x = L for low power SKUs.
NOTE:
All processors support Intel® Hyper-Threading and Intel® Turbo Boost
Technologies except the E5-2603 and E5-2609.
NOTE:
When HP 24GB (1x24GB) Three Rank x4 PC3L-10600R (DDR3-1333) Registered
CAS-9 Low Voltage FIO Memory Kits are used with any processors except the E5-2690,
the E5-2643, the E5-2637 v2, the E5-2643 v2, or the E5-2667 v2 all 16 DIMM slots on
the WS460c Gen8 must be fully populated with these 24GB DIMMs. When HP 24GB
(1x24GB) Three Rank x4 PC3L-10600R (DDR3-1333) Registered CAS-9 Low Voltage FIO
Memory Kits are used with either the E5-2690, the E5-2643, the E5-2637 v2, the E5-
2643 v2, or the E5-2667 v2, all 12 available DIMM slots on the WS460c Gen8 must be
fully populated with these 24GB DIMMs.
HP Memory
NOTE:
HP memory from previous generation servers are not qualified or warranted
with this HP ProLiant WS460c Server. HP SmartMemory is required to realize the
memory performance improvements and enhanced functionality listed in this
document for Gen8. For additional information, please see the HP SmartMemory
QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/14225_na/14225_na.html
NOTE:
LRDIMM, RDIMM and UDIMMs are all distinct memory technologies and cannot be
mixed within a server. The majority of ProLiant Gen8 servers support RDIMM, UDIMM
and LRDIMM.
NOTE:
A minimum of one DIMM is required per server.
NOTE:
For additional memory rules and guidelines, see the "Memory" section later in
this document.
NOTE:
When HP 24GB (1x24GB) Three Rank x4 PC3L-10600R (DDR3-1333) Registered
CAS-9 Low Voltage FIO Memory Kits are used with any processors except the E5-2690,
the E5-2643, the E5-2637 v2, the E5-2643 v2, or the E5-2667 v2 all 16 DIMM slots on
the WS460c Gen8 must be fully populated with these 24GB DIMMs. When HP 24GB
(1x24GB) Three Rank x4 PC3L-10600R (DDR3-1333) Registered CAS-9 Low Voltage FIO
Memory Kits are used with either the E5-2690, the E5-2643, the E5-2637 v2, the E5-
2643 v2, or the E5-2667 v2, all 12 available DIMM slots on the WS460c Gen8 must be
fully populated with these 24GB DIMMs.
NOTE:
The internal USB 2.0 Port is not available when the HP 24GB (1x24GB) Three
Rank x4 PC3L-10600R (DDR3-1333) Registered CAS-9 Low Voltage FIO Memory Kits
(700404-B21) are used.
QuickSpecs
HP ProLiant WS460c Gen8 Workstation Blade
Core Options
DA - 14409 North America — Version 16 — December 13, 2013
Page 33
