Identifying Components
3-20
HP UPS R12000 XR Models Maintenance and Service Guide
HP CONFIDENTIAL
Codename: Sierra Part Number: 221273-001 Last Saved On: 7/31/02 8:58 AM
The
Parallel Mode
menu options allow you to configure the UPS mode of operation, as
described in Table 3-11.
Table 3-11: Parallel Mode Choices
LCD Display
Explanation
Parallel Mode
For Capacity
Select this option to configure the UPS for capacity operation.
Parallel Mode
N+1 Redundancy
Select this option to configure the UPS for redundant operation.
Setting the Language
Select
Set Language
from the
System Setup
menu to select from seven different languages
for the menu display. The available choices are English, Francais, Deutsch, Espanol,
Japanese, Nederlands, and Italiano. An asterisk (*) indicates the current configuration.
System Setup
Set Language
Setting the Password
Select
Set Password
from the
System Setup
menu to set the password.
System Setup
Set Password
To access some of the more critical UPS operations, you must have a password. Use the
Center and Enter buttons to select the six digits for the password [0-9 and A-Z].
NOTE:
The password must be six characters long. The default password is
COMPAQ
.
Enter Password
COMPAQ
1. Select the first digit using the up and down arrow keys on the Center button.
2. Press the right arrow key on the Center button to move to the next digit.
3. To change a digit, use the left arrow key on the
Center button to go back.
4. After entering the entire password, press the Enter button.
IMPORTANT:
Record your password. After 30 minutes with no key presses, security is
automatically restored and the display changes to the main status display.