background image

38

Regulatory information

This section presents information that shows how your digital projector complies
with regulations in certain regions. Any modifications to your digital projector
not expressly approved by Hewlett Packard could void the authority to operate
the digital projector in these regions.

U.S.A.

This digital projector has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This digital projector generates, uses, and can radiate radio frequency energy.
If not installed and used in accordance with the instructions, it may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.  If this digital projector does
cause harmful interference to radio or television reception (which can be
determined by unplugging the unit), try the following:

· Reorienting or relocating the receiving antenna.
· Relocating the digital projector with respect to the receiver.
· Connecting the digital projector’s power cord to another power outlet.

Connections to Peripheral Devices

To maintain compliance with FCC Rules and Regulations, use properly shielded
cables with this device.
For more information, consult your dealer, an experienced radio/television
technician, or the following booklet, prepared by the Federal Communications
Commission: 

How to Identify and Resolve Radio-TV Interference Problems

. This

booklet is available from the U.S. Government Printing Office, Washington, DC
20402, Stock Number 004-000-00345-4. At the first printing of this manual, the
telephone number was (202) 512-1800.

Japanese Notice

xb31 sb21

regulatory

information

Summary of Contents for sb21











































Reviews: