3.
Release the bottom speaker (3) from the molding built into the display panel assembly.
4.
Remove the bottom speaker and vibrator module.
Reverse this procedure to install the bottom speaker and vibrator module.
System board
Description
Spare part number
System board equipped with a Qualcomm MSM8926 1.20-GHz quad core processor (SoC),
graphics subsystem with UMA memory, 1.0-GB LPDDR3 system memory, and 16-GB
eMMC hard drive (includes top speaker)
788638-001
Before removing the system board, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the back cover (see
Back cover on page 13
).
5.
Remove the battery (see
Battery on page 14
).
6.
Remove the middle frame (see
Middle frame on page 16
).
Remove the system board:
System board 21
