background image

Speakers

Description

Spare part number

Left speaker (includes cable and double-sided adhesive)

941847-001

Left speaker (includes cable and double-sided adhesive)

941848-001

Before removing the speakers, follow these steps:

1.

Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer 
on, and then shut it down through the operating system.

2.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then 
unplugging the AC adapter from the computer.

3.

Disconnect all external devices from the computer.

4.

Remove the bottom cover (see 

Bottom cover on page 30

), and then remove the following components:

a.

Battery (see 

Battery on page 32

)

b.

Fans (see 

Fans on page 39

)

c.

System board (see 

System board on page 41

)

Remove the speakers:

Detach the left and right speakers from the keyboard/top cover. (The speakers are attached to 
the keyboard/top cover with double-sided adhesive.)

Reverse this procedure to install the speakers.

Component replacement procedures

49

Summary of Contents for Spectre 13













































































Reviews: