Installation, Configuration, and Usage
Considerations for FASTPSMB
Spooler FASTP Network Print Processes Manual — 427528-006
4 - 12
Optional DEVICE Attributes for FASTPSMB
Table 4-5
shows some examples of originator text:
Example 4-1
shows some of the Spooler attributes that are assigned to a job.
Note that the values for job 1 were generated using the originator text in
Table 4-5
.
PASSWORD =
password
specifies the password, if a password is required, for shared-mode access to the
SMB LAN print queue. The maximum password length allowed is 16 characters.
This attribute value is case sensitive.
A shared password is assigned with some form of a
net share
command. The
format of such a command is determined by your LAN networking application. For
example, the following
net share
command:
net share SRV1=LPT1 Secret
would require the following
PASSWORD
specification:
PASSWORD = Secret
The PASSWORD specification is optional. If the PASSWORD attribute is not
specified, the password defaults to the
NULL
value (that is, the first byte is zero).
Table 4-6
summarizes valid and invalid uses of the
NULL
value password.
Table 4-5. Examples of Originator Text
Spooler Attribute
Value
Originator
Attribute
Value
Originator Text
Example Title
Spooler job location
LOCATION
LAN3
LOCATION in the example
Spooler job title
REPORT
SUPER SPOOL
REPORT in the example
Spooler job owner
USER
255,55
OWNER in the example
Spooler FASTP network
print process name
concatenated with
spooler job number
FASTPJOB
$FPLP1
PRINT and JOB in the
example
Example 4-1. Example of Spooler Job Attributes
SPOOLCOM - T9101C31 - (25JAN93) SYSTEM \BOBO
Copyright Tandem Computers Incorporated 1978, 1982, 1983,1984, 1985,
1986,1987, 1988, 1989, 1990, 1991
)job
JOB BATCH STA FLAGS OWNER TIME COPY PAGE REPORT LOCATION
1 RDY 4 255,55 08/18 1 1 SUPER SPOOL #LAN3
2 RDY 4 10,10 08/18 1 1 INVENTRYPOST1 #LAN6
)print
PRINT STATE FLAGS CPU PRI
$FPLP ACTIVE 6 ,7 144
