SECLIB_System Error Messages
91
Diagnostic and System Error Messages Version 3.1.x Reference Guide
SECLIB_System Error Messages
The SECLIB (Security Library) is a facility used by the FabOS modules. The
SECLIB provides functionality for enforcement of policies, identification of the
switch’s role in the fabric, and other tasks. Switch Connection Control (SCC),
Device Connection Control (DCC), Management Server (MS), and Internet
Protocol (IP) policies are enforced and Fibre Channel Switch (FCS) and non-FCS
roles are identified, using the SECLIB functions.
Message
Explanation
A security violation was reported. The specified unauthorized device attempted to
flogin to the specified port and switch.
Recommended Action
Check DCC policy and verify that the specified device is allowed in the fabric and
is included in the DCC policy. If the specified device is not included in the policy,
add it to the policy. If the device is not allowed, this is a valid violation message
and an unauthorized entity is trying to gain access to the fabric. Action should be
taken as specified by your enterprise security policy.
Severity
Informational
SECLIB-SECVIOL_DCC
<switch number> Info SECLIB-SECVIOL_DCC, 4, Security violation:
Unauthorized device <device node name> tries to flogin to port <port number>
of switch <port node name>.
