Fabric OS reference guide
162
Fabric OS 3.x Document Addendum
The download can fail for any of the following reasons:
■
The switch has not been disabled.
■
The host name is not known to the switch.
■
The host IP address cannot be contacted.
■
The user does not have permission on the host.
■
The user runs a script that prints something at login.
■
The file does not exist on the host.
■
The file is not a switch configuration file.
■
The RSHD or FTP server is not running on the host.
■
The configuration data contains errors.
When the switch is in secure mode, the following rules and restrictions apply:
■
Both defined security policies and active security policies sections must exist and contain
the FCS_POLICY.
■
In the defined security policies section, at least one member of the FCS_POLICY must be
the same as a member in the previous FCS_POLICY.
■
In the active security policies section, the FCS_POLICY must be exactly the same as the
previous FCS_POLICY; order of members must be maintained.
■
If either security policies section has an RSNMP_POLICY, that section must have a
WSNMP_POLICY.
■
After the switch is enabled, if the switch is the primary FCS, its security and zoning
information is propagated to all other switches in the fabric.
■
After the switch is enabled, if the switch is a non-FCS or a backup FCS, its security and
zoning information are overwritten by the primary FCS.
Summary of Contents for StorageWorks 2/16 - SAN Switch
