manualshive.com logo in svg

HP StorageWorks 8B - FC Entry Switch, Reference Manual

The HP StorageWorks 8B - FC Entry Switch is a high-performance storage solution offering seamless connectivity. This reliable product ensures efficient data transmission and storage capabilities. Easily access its user manual for setup and troubleshooting instructions, completely free, on our website 88.208.23.73:8080. Download the manual today for a hassle-free experience.

Share
Download
background image

Glossary-2

Fabric OS Reference

BER

Bit Error Rate; the rate at which bits are expected to be received in error. 
Expressed as the ratio of error bits to total bits transmitted. See also Error.

Block

As applies to Fibre Channel, upper-level application data that is transferred in a 
single sequence.

Broadcast

The transmission of data from a single source to all devices in the fabric, 
regardless of zoning. See also Multicast, Unicast.

Buffer

-

to

-

buffer 

Flow Control

Management of the frame transmission rate in either a point-to-point topology or 
in an arbitrated loop. See also BB_Credit.

Cascade

Two or more interconnected Fibre Channel switches. For HP switches, a 
maximum of seven hops is recommended (no path longer than eight switches). 
See also Fabric, ISL.

Chassis

The metal frame in which the switch and switch components are mounted. 

Circuit

An established communication path between two ports. Consists of two virtual 
circuits capable of transmitting in opposite directions. See also Link.

Class 1

Service that provides a dedicated connection between two ports (also called 
connection-oriented service), with notification of delivery or nondelivery.

Class 2

Service that provides multiplex and connectionless frame switching service 
between two ports, with notification of delivery or nondelivery. 

Class 3

Service that provides a connectionless frame switching service between two ports, 
without notification of delivery or nondelivery of data. Can also be used to 
provide a multicast connection between the originator and recipients, with 
notification of delivery or nondelivery.

Class F

Connectionless service for control traffic between switches, with notification of 
delivery or nondelivery of data between the E_Ports.

Class of 
Service

A specified set of delivery characteristics and attributes for frame delivery.

Comma

A unique pattern (either 1100000 or 0011111) used in 8B/10B encoding to specify 
character alignment within a data stream. See also K28.5.

Community 
(SNMP)

A relationship between a group of SNMP managers and an SNMP agent, in which 
authentication, access control, and proxy characteristics are defined. See also 
SNMP.

CRC

Cyclic Redundancy Check; a check for transmission errors included in every data 
frame.

Credit

As applies to Fibre Channel, the number of receive buffers available for 
transmission of frames between ports. See also BB_Credit, EE_Credit.

Cut

-through

A switching technique that allows the route for a frame to be selected as soon as 
the destination address is received. See also Route.

Data Word

Type of transmission word that occurs within frames. The frame header, data 
field, and CRC all consist of data words. See also Frame, Ordered set, 
Transmission Word.

Defined Zone 
Configuration

The set of all zone objects defined in the fabric. May include multiple zone 
configurations. See also Enabled Configuration, Zone Configuration.

Summary of Contents for StorageWorks 8B - FC Entry Switch























































































































































































































































































































































Reviews:

No comments

Related manuals for StorageWorks 8B - FC Entry Switch

Hanwha Techwin SBP-300HM7 Quick Start Manual preview
SBP-300HM7
Brand: Hanwha Techwin Pages: 2
OMB TROLLEY E700 Installation Instructions Manual preview
TROLLEY E700
Brand: OMB Pages: 6
skyvoe NXG-65 Installation Manual preview
NXG-65
Brand: skyvoe Pages: 9
Graham Field Everest & Jennings IV-O2 Installation Instructions preview
Everest & Jennings IV-O2
Brand: Graham Field Pages: 4
Hammond Manufacturing HWM Series Instructions Manual preview
HWM Series
Brand: Hammond Manufacturing Pages: 9
FibreHead FH-4WH Quick Start Manual preview
FH-4WH
Brand: FibreHead Pages: 4
Xavax Gigant 00111380 Operating Instructions Manual preview
Gigant 00111380
Brand: Xavax Pages: 22
B-Tech BT8505 Installation Manual preview
BT8505
Brand: B-Tech Pages: 16
Fellowes Tallo Manual preview
Tallo
Brand: Fellowes Pages: 6
Da-Lite MPS-ACM Instructions preview
MPS-ACM
Brand: Da-Lite Pages: 4
Ropox 40-40906 Mounting Instructions preview
40-40906
Brand: Ropox Pages: 12
CHIEF CPA116 Installation Instruction preview
CPA116
Brand: CHIEF Pages: 20
Deltaco ARM-473 User Manual preview
ARM-473
Brand: Deltaco Pages: 7
Kenroy Home 65079 Use And Care Manual preview
65079
Brand: Kenroy Home Pages: 4
YOKOGAWA 751533-J4 User Manual preview
751533-J4
Brand: YOKOGAWA Pages: 2
New Star Computer Products FPMA-DTB100 Instruction Manual preview
FPMA-DTB100
Brand: New Star Computer Products Pages: 2
Atdec Telehook Installation Instructions preview
Telehook
Brand: Atdec Pages: 2
ALZA APW-EGSMGO05WB User Manual preview
APW-EGSMGO05WB
Brand: ALZA Pages: 12

Brands by name

Popular brands

Load more brands