e1200-320 4Gb Fibre Channel Interface Card user and service guide 111
EVPD Page 0x80
If the EVPD bit is set and the Page Code is 0x80 the
unit serial number page
is returned. The format of this
page is shown in
Table 15
.
Table 15
Format of EVPD Page 0x80
The serial number field is a 16-byte left-justified ASCII string.
Device Identification Page 0x83
If the EVPD bit is set and the Page Code is 0x83 the
device identification page
is returned, as described
in SPC-2 section 8.4.4.
Table 16
HP e1200-320 4Gb Interface Card LUN Inquiry Data
The interface card will only reply to a SCSI Inquiry when using 8-byte LUN field of 0x00's.
Bit
Byte
7
6
5
4
3
2
1
0
0
Device Type (0ch)
1
Page Code (80h)
3
Reserved
4
Page Length
5...20
Serial Number
Item
Value
Peripheral Qualifier
0x00
Peripheral Device Type
0x0C - Indicates Router/interface card function
RMB
0x00
Device Type Qualifier
0x00
ISO Version
0x00
AENC
0x00
TrmIOP
0x00
Response Data Format
0x02 - SCSI-2 Inquiry Data Format
Additional Length
0x20
RelAdr
0x00
Wbus32
0x00
Wbus16
0x00
Sync
0x00
Linked
0x00
CmdQue
0x00
SftRe
0x00
Vendor ID
“CROSSRDS”
Product ID
“interface card interface card”
Revision Level
“XXXXX”
Summary of Contents for StorageWorks e1200-320
