Repair Information
121
Edge Switch 2/12 Service Manual
Reset Configuration Data
The EWS interface provides the option to reset the configuration file to factory
default values. The switch must be set offline prior to restoring the configuration
file. Configuration data in the file include:
■
Switch identification data.
■
Port configuration data.
■
Switch and fabric operating parameters.
■
Simple network management protocol (SNMP) configuration information.
■
Zoning configuration information.
To reset switch data to the factory default settings from the EWS interface:
Note:
When switch configuration data is reset to factory default values, all optional
features are disabled.
1. Notify the customer the switch is to be set offline. Ensure the customer’s
system administrator quiesces Fibre Channel frame traffic through the switch
and sets attached FC-AL devices offline.
2. Set the switch offline. For instructions, refer to “
3. When the EWS interface opens, the View panel and Switch page appear as
the default. At the View panel, select the Operations option at the left side of
the panel. The Operations panel opens with the Switch page displayed.
4. Click the Reset Config tab. The Switch page displays with the Reset Config
tab selected (
).
