Table 18 Controller port status indicators
Description
Port
•
Green—Normal operation
•
Amber—No signal detected
•
Off—No SFP
1
detected or the Direct Connect OCP setting is incorrect
Fibre Channel host ports
•
Green—Normal operation
•
Amber—No signal detected or the controller has failed the port
•
Off—No SFP
1
detected
Fibre Channel device ports
•
Green—Normal operation
•
Amber—No signal detected or the controller has failed the port
•
Off—No SFP
1
detected
Fibre Channel cache mirror ports
•
Green—Normal operation
•
Amber—Interconnect cable not connected
Dual controller interconnect port
1
On copper Fibre Channel cables, the SFP is integrated into the cable connector.
Navigation buttons
The operation of the navigation buttons is determined by the current display and location in the
menu structure.
Table 19 (page 51)
defines the basic pushbutton functions when navigating the
menus and options.
To simplify presentation and to avoid confusion, the pushbutton reference names, regardless of
labels, are left, right, top, and bottom.
Table 19 Navigation button functions
Function
Button
Moves down through the available menus and options
Moves up through the available menus and options
Selects the displayed menu or option.
Returns to the previous menu.
Used for “No” selections and to return to the default display.
Esc
Used for “Yes” selections and to progress through menu items.
Enter
Alphanumeric display
The alphanumeric display uses two LCD rows, each capable of displaying up to 20 alphanumeric
characters. By default, the alphanumeric display alternates between displaying the Storage System
Name and the World Wide Name. An active (flashing) display, an error condition message, or
a user entry (pressing a push-button) overrides the default display. When none of these conditions
exist, the default display returns after approximately 10 seconds.
Displaying the OCP menu tree
The Storage System Menu Tree lets you select information to be displayed, configuration settings
to change, or procedures to implement. To enter the menu tree, press any navigation push-button
when the default display is active.
HSV controllers
51
