Configuring SCSI Routing
130
IP Storage Router SR2122-2 User Guide
An access list can contain one or more types of identification entries. If an
identification entry type exists in the access list, the IP host attempting to access
the associated storage target must have a matching entry defined in the access list.
For example, if an access list contains both IP address and iSCSI name
identification entry types, then every IP host that requires access to the associated
set of storage resources must have a matching IP address and iSCSI name entry in
the access list.
An access list is necessary if you want to specify access to iSCSI targets on a
per-IP host basis. An access list is not necessary if you want to specify that all IP
hosts have access to the iSCSI targets configured in a SCSI routing instance.
Note:
If there is a CHAP user name entry in the access list, the SCSI routing instance
used to access the storage target must also have iSCSI authentication enabled. See
Chapter 10, “Configuring Authentication”
for additional information about AAA and
iSCSI authentication.
Use the following procedure to create an access list. In this procedure, the access
list is called
aegis
and the IP host identifiers include three IP addresses
(
10.2.0.23, 10.3.0.36
, and
10.4.0.49
) and a CHAP-username
(
12h7b.lab2.webservices
):
1.
enable
— Enter Administration mode.
2.
accesslist
aegis
—
Create an access list by naming it
aegis
. There is
a 31 character limit.
3.
accesslist
aegis
description
“Access to zeus SCSI
routing service”
—
Add a string as a description for the access list.
Enclose the string using single or double quotes. (Optional)
4.
accesslist
aegis 10.2.0.23/32 10.3.0.36/32 10.4.0.49/32
—
Add IP addresses of IP hosts to the access list. Separate multiple IP addresses
with a space. To limit the access to each IP address, set the subnet mask to
255.255.255.255
. In this example, the subnet mask was set using CIDR
style
/32
.
5.
accesslist
aegis
CHAP-username
12h7b.lab2.webservices
—
Add CHAP-usernames in the access list.
To limit the access to each CHAP-username. The password it supplies must
be successfully validated using the AAA method configured.
Summary of Contents for StorageWorks SR2122
