3-12
Chapter 3
Operating the Jukebox
Ejecting a Disk From the Jukebox
Ejecting a Disk From the Jukebox
NOTE
Some software packages require that you load and eject disks by following the
instructions in the software. If you use a software package to manage files in the
jukebox, check the software documentation before proceeding with these steps.
Start with
READY
,
LOAD *
or
EJECT *
in the display
.
1. Press
EJECT
on the jukebox control panel.
2.
EJECT SLOT #
displays. (“#” is flashing and the number of the first storage
slot in the jukebox that contains an optical disk.)
3. If you want to select the storage slot number that shows in the display, press
EJECT
or
ENTER
. If you want to choose a different storage slot, press
NEXT
or
PREV
until the desired slot number displays and then press
ENTER
. (See the note
on the following page.)
EJECTING
displays as the jukebox moves the disk to the mailslot. When the
disk is in the mailslot, the display returns to
EJECT SLOT
#.
4. Remove the disk from the mailslot.
You may now eject additional disks by pressing the
EJECT
or
ENTER
key and
then following steps 2 through 4 until you are finished ejecting disks. When the
last disk is ejected,
EMPTY
displays briefly before returning to
EJECT
*.
5. Press
CANCEL
to return to the
READY
state.
Summary of Contents for SureStore 220mx
