88 Drive and Tape Operations
Chapter 2
1. From the
Drive and Tape Operations
menu, select
[Clean Drive]
.
2. From
Choose Cleaning Slot
, use the
[-]
,
[+]
or
[++]
key to select the slot
location of the cleaning tape. Refer to the label inside the library drawer,
the front panel display, or
Library Back Panel Features
on page 33 for a
list of the slot numbers.
Select
[OK]
.
3. Using
the
[-]
or
[+]
keys, select the number of the drive to be cleaned.
Select
[Clean]
.
When the cleaning process is complete, the cleaning tape will be returned
to the original slot location. If the cycle failed, the screen will display the
appropriate status information. See
Troubleshooting Common Problems
on page 140 for possible cleaning problems.
Note
Drives can also be cleaned from remote access. See
Using the
Remote Management Card
on page 96.
Moving Tapes Between Slots
1. From the
Drive and Tape Operations
menu, select
[Move Tape Slot-to-Slot]
.
2. Select the slot where you want to move the tape
from
using the
[-]
,
[+]
or
[++]
keys, and press
[OK]
.
3. Select the slot where you want to move the tape
to
using the
[-]
,
[+]
or
[++]
keys, and press
[OK]
. A message will display if the destination slot chosen
is reserved or is the original “home” slot for a tape in the drive.
A status screen indicates the tape is being moved.
Main Menu -> Operations -> Drive and Tape Operations
Summary of Contents for Surestore E Tape Library Model 2/20
