Capture HP ThinPro Image to a Bootable USB Flash Drive
A bootable USB flash drive with an HP ThinPro image allows you to restore the image or duplicate it on
different thin clients.
NOTE:
Back up any data on the USB flash drive before you begin. ThinState automatically formats
the flash drive to create a bootable USB flash drive. This process will erase all data currently on the
flash drive.
1.
Click
Control Panel
>
Management
>
Thinstate
.
2.
Select
the HP ThinPro image
, and then click
Next
.
3.
Select
make a copy of the HP ThinPro image
, and then click
Next
.
4.
Click
create a bootable USB flash drive
, and then click
Next
.
5.
Attach a USB flash drive to the thin client. Select the USB key and click
Finish
.
When the image capture begins, all applications stop and a new window appears showing the copy
progress. If a problem occurs, click
Details
for information. The desktop reappears after capture
is complete.
HP ThinPro image capture is complete.
To install an HP ThinPro image from a USB flash drive, simply attach the USB flash drive to the target
thin client, reboot the unit, and follow the onscreen instructions.
ENWW
Control Panel 121