NOTE:
You can set only primary connections to automatically reconnect.
6.
In the
Persistent
column, if the entry for the selected connection is
No
, click on
No
to change it
to
Yes
.
7.
To arrange the order of connections, select a connection and click the up and down arrows.
Secondary connections are associated with the first primary connection above them in the list.
8.
Click
Apply
to save your changes.
NOTE:
You can set only primary connections to automatically connect when HP ThinConnect is
launched.
Configuring the User Interface
The
Global UI
tab on the Advanced window allows you to configure HP ThinConnect to start
automatically and allows you to set up Kiosk mode.
Auto Starting HP ThinConnect
You can enable automatic log on, which causes HP ThinConnect to start automatically when the user
logs in to Windows.
To auto start HP ThinConnect:
1.
In the HP ThinConnect window, click
Advanced
.
2.
Click the
Global UI
tab.
3.
Select
Auto start HP ThinConnect when logging into Windows
.
4.
Click
Apply
to save changes.
ENWW
Configuring the User Interface
17