Touch Screen
Touch Screen allows you to operate the thin client by touching the display screen.
To enable the touch screen:
1.
Double-click
Touch Screen
and select
2.
Select
Enable Touch Screen
.
3.
Select the
Controller Type
and
Device Port
, and elect to
Swap X
or
Swap Y
, if desired.
4.
Click
OK
to save your changes and close the dialog box.
A message appears to inform you that your changes will take effect at the next login.
5.
Click
Yes
to log off and restart the desktop with your changes.
If you click
No
, the current desktop environment will remain unchanged.
6.
Click
Control Panel
>
Peripherals
>
Touch Screen
and click
Calibrate
to calibrate the touch
screen.
NOTE:
The touch screen can only be calibrated if it has been enabled and the desktop
restarted.
The touch screen will not track correctly on the screen if the display is rotated.
USB Manager
To set USB mounting preferences:
1.
Double-click
USB Manager
.
2.
Select one of the following remote protocols:
●
Citrix
●
Local
●
RDP
●
RGS
●
VMware View
●
vWorkspace
3.
If the setting is
Local
, you can also specify:
allow devices to be mounted
and
mount devices
read-only
.
4.
Click
OK
to save your preference and close the dialog box.
Setup
These utilities enable you to set up the thin client to your requirements. The following utilities are
available on the Setup tab:
●
Date and Time on page 39
●
Global Network Settings on page 39
38
Chapter 3 Reference
ENWW
Summary of Contents for t5565 - Thin Client
Page 1: ...Administrator s Guide HP ThinPro version 3 2 ...
Page 4: ...iv About This Book ENWW ...
Page 8: ...viii ENWW ...