background image

3.

Set the dimensions and color of the progress bar.

4.

If you plan to have text in the boot splash, click 

Enable text

 and select the text color.

5.

Click 

Preview

 to preview your changes. Click 

OK

 to save your changes and close the dialog

box.

Desktop Background

To change the desktop background:

1.

Double-click 

Desktop Background

.

2.

Click 

Change

, browse to the image file you want to use as the desktop background, and then

click 

Open

.

3.

In the 

Style

 list, select 

center

tile

, or 

fullscreen

.

4.

Click 

Restore Default

 to discard changes and return to the factory image.

5.

To change the color, select 

Color

 and select a color in the 

Color

 list.

6.

Click 

Apply

, and then click 

OK

 to save your changes and close the dialog box.

Screensaver

To configure the screensaver:

1.

Double-click 

Screensaver

.

2.

Select the 

Screensaver settings

:

a.

Select 

Enable screensaver

, or clear the selection if you do not want a screensaver.

b.

Select the number of minutes of inactivity after which to activate the screensaver. Type the
number in the field or use the up or down arrow keys to select a number.

c.

Select 

Require password on resume

, if desired.

d.

Select the 

Mode

:

blank

logo

e.

If you selected 

logo

, select 

Customize a logo

, and then click 

Select

 to browse to the

desired logo file.

3.

Configure the 

Display Power Management

 settings to turn off the display after a set period of

inactivity:

a.

Select 

Enable Display Power Management

, or clear the selection if you do not want to set

this feature.

b.

Select the idle time in minutes after which to turn off the display. Type the number in the
field or use the up or down arrow keys to select a number.

4.

Click 

OK

 to save your changes and close the dialog box.

ENWW

Control Panel

45

Summary of Contents for t5565 - Thin Client






































































Reviews: