●
System Recovery—Reinstalls the original operating system, and then configures the settings for
the programs that were installed at the factory.
●
Factory Reset—Restores the tablet to its original factory state by deleting all information from
the hard drive and re-creating the partitions. Then it reinstalls the operating system and the
software that was installed at the factory.
The HP Recovery partition (select models only) allows System Recovery and Minimized Image
Recovery.
What you need to know
●
HP Recovery Manager recovers only software that was installed at the factory. For software not
provided with this tablet, you must either download the software from the manufacturer's website
or reinstall the software from the media provided by the manufacturer.
●
Recovery through HP Recovery Manager should be used as a final attempt to correct tablet
issues.
●
HP Recovery media must be used if the tablet hard drive fails. If you have not already created
recovery media, see
Creating HP Recovery media on page 46
.
●
To use the Factory Reset option, you must use HP Recovery media. If you have not already
created recovery media, see
Creating HP Recovery media on page 46
.
●
If the HP Recovery media does not work, you can obtain recovery media for your system from
support. See the
Worldwide Telephone Numbers booklet included with the tablet. You can also
find contact information from the HP website. Go to
http://www.hp.com/support
, select your
country or region, and follow the on-screen instructions.
IMPORTANT:
HP Recovery Manager does not automatically provide backups of your personal
data. Before beginning recovery, back up any personal data you wish to retain.
Using the HP Recovery partition (select models only)
The HP Recovery partition (select models only) allows you to perform a system recovery or
minimized image recovery without the need for recovery discs or a recovery USB flash drive. This
type of recovery can only be used if the hard drive is still working.
To start HP Recovery Manager from the HP Recovery partition:
IMPORTANT:
For tablets, connect to the keyboard dock before beginning these steps (select
models only).
1.
Press
f11
while the tablet boots.
– or –
Press and hold
f11
as you press the power button.
2.
Select Troubleshoot from the boot options menu.
3.
Select Recovery Manager, and then follow the on-screen instructions.
Using HP Recovery media to recover
You can use HP Recovery media to recover the original system. This method can be used if your
system does not have an HP Recovery partition or if the hard drive is not working properly.
48 Chapter 11 Backing up, restoring, and recovering