MultiBoot
Hardware and Software Guide
B–3
Bootable Devices in Computer Setup
The tablet PC can start up from a USB device or the NIC only if
that device has been enabled for inclusion in MultiBoot.
To enable a device or location for inclusion in MultiBoot:
1. Open Computer Setup by turning on or restarting the
tablet PC. Press
f10
while the F10 = ROM Based Setup
message is displayed in the lower-left corner of the screen.
❏
To change the language, press
f2.
❏
For navigation instructions, press
f1.
2. To enable bootable media in USB drives or in drives inserted
into an optional docking device, use the arrow keys to select
Advanced
>
Device options.
Then select
Enable USB
legacy support.
– or –
To enable a NIC, select
Security > Device security,
and then
select
Internal network adapter boot.
3. Save your preferences and exit Computer Setup by using the
arrow keys to select
File > Save changes and exit,
and then
follow the instructions on the screen.
Your preferences are set when you exit Computer Setup and they
take effect when the tablet PC restarts.
✎
To connect a NIC to a Preboot eXecution Environment (PXE)
or Remote Program Load (RPL) server during startup without
using MultiBoot, quickly press
f12
when the Network Service
Boot message appears in the lower-right corner of the screen.
