Chapter 5
Installing Additional Memory
42
System Board
DIMM Slots
1
2
3
Figure 5-4. DIMM Insertion
10. Repeat Steps 7-9 to install the remaining DIMMs of your memory
configuration.
Removing DIMMs
You may need to remove a DIMM module to downsize your memory
configuration or to replace a defective DIMM.
1. If the Server is already installed and working, power down the Server.
Refer to Chapter 2, "Controls, Ports, and Indicators."
2. Disconnect the power cables and all external cables.
If necessary, label each one to support re-assembly.
WARNING
The power supply will continue to provide standby current to
the Server until the power cable is disconnected.