manualshive.com logo in svg

HP Tc4100 - Server - 256 MB RAM, Operation And Maintenance Manual

The HP Tc4100 server, equipped with 256 MB RAM, is a reliable and efficient solution for your business needs. To ensure seamless maintenance and operation, a comprehensive Maintenance Manual is available for download, absolutely free, from our website. Get your hands on this user-friendly manual and optimize your server's performance.

Share
Download
background image

1

1 Control and Indicators   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  5

Front Panel Control and Indicators .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  5

Power, Reset, and Keyboard Lock Buttons  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  8
Front Panel LED Indicators   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  9
Internal Diagnostic Panel (Optional Accessory) .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   10
Hot Swap Disk Drive Indicators  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   12
Non-Hot Swap Disk Drive Indicators.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  12
Rear Panel Indicators and Ports .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   12
Power Supply Indicator   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   13
Communication Ports  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   13
NIC Indicators  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   14

Applying Power to the HP Server tc4100 .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   14

Powering Up the HP Server tc4100  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  14
Powering Down the HP Server tc4100.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   14
Connecting AC Power to Multiple-Server Configurations  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   15
Sleep States (ACPI)  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   15

2 External Connectors   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   16

Mini-DIN (PS/2) for Mouse and Keyboard  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  16
Serial Port   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   16
Parallel Port   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   17
USB.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   18
Standard Video .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   18
Standard SCSI  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   19
Standard LAN.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   20

3 Installing and Configuring  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   21

Opening and Closing the HP Server tc4100  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   21

Introduction   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   21
Removing the HP Server tc4100’s Covers.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   21
Removing Covers – Pedestal  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   25
Removing the Pedestal   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   27

Mass Storage Devices  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   29

Introduction   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   29
Installing Storage Devices After Shipment.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   29
Installing Hot Swap Hard Drives .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   35
Removing Hot Swap Hard Drives  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  36
Installing Non-Hot Swap Storage Devices .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   37
Connecting External SCSI Devices  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  39

Memory Modules .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   39

Introduction   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   39
DIMM Installation   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   40
DIMM Removal   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   43

Processors  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   44

Introduction   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   44

Contents

Summary of Contents for Tc4100 - Server - 256 MB RAM



































































































































Reviews:

No comments

Related manuals for Tc4100 - Server - 256 MB RAM

HALDER EH 22350 Translation Of Original Instructions preview
EH 22350
Brand: HALDER Pages: 2
K2 Systems Splice Foot X Installation Manual preview
Splice Foot X
Brand: K2 Systems Pages: 24
RuarkAudio R7 AV Mount Assembly Instructions preview
R7 AV Mount
Brand: RuarkAudio Pages: 3
B-Tech BT8353 Installation Manual & Parts List preview
BT8353
Brand: B-Tech Pages: 24
Thermon Terminator WMK Series Installation Procedures preview
Terminator WMK Series
Brand: Thermon Pages: 4
PEERLESS CMJ 470W Installation And Assembly preview
CMJ 470W
Brand: PEERLESS Pages: 2
Mail Boss 7127-7155 Quick Start Manual preview
7127-7155
Brand: Mail Boss Pages: 2
GABOR LeviTouch DM-500 User Manual preview
LeviTouch DM-500
Brand: GABOR Pages: 20
ADDER RMK12 Quick Start preview
RMK12
Brand: ADDER Pages: 2
Medrad Ceiling Mount Plate Placement Considerations And Installation Requirements preview
Ceiling Mount Plate
Brand: Medrad Pages: 55
TYPE A Prima 142-0721-6 Assembly Instructions Manual preview
Prima 142-0721-6
Brand: TYPE A Pages: 12
Insignia NS-PCSSDM7 Quick Setup Manual preview
NS-PCSSDM7
Brand: Insignia Pages: 2
SORINEX Iron Bear Assembly Instructions preview
Iron Bear
Brand: SORINEX Pages: 2
nedis TVCM5830BK Installation Manual preview
TVCM5830BK
Brand: nedis Pages: 8
La Siesta TreeMount Manual preview
TreeMount
Brand: La Siesta Pages: 16
L-Acoustics K2-JACK Product Information preview
K2-JACK
Brand: L-Acoustics Pages: 4
CiERA EZ StandTall ONE Installation Instructions preview
EZ StandTall ONE
Brand: CiERA Pages: 2
OBERON Aruba 1044-ARAP5 Series Installation Manual preview
Aruba 1044-ARAP5 Series
Brand: OBERON Pages: 3

Brands by name

Popular brands

Load more brands