background image

1  Connecting to a Netware 3.12 Server

Windows 95 SR2

10

Set the path to “A:\” and click on “OK.” (If you have a Hewlett-Packard 
pre-loaded HDD, set the path statement to “C:\LANDRV\3C900\Disk1\”)

11

“3Com Etherlink XL TPO 10Mb Ethernet Adapter” should now be listed.  
Click on “Finish.”

12

When prompted, insert the 3C900 driver’s disk 2 of 2 and click on “OK.”

13

In the “Copying Files…” window, the path should read “A:\” (If you have 
an HP pre-loaded HDD, set the path statement to 
“C:\LANDRV\3C900\Disk2\”)

14

Click on “OK” to continue the installation.

15

Click on “OK” in order to provide Computer and Workgroup names.

16

At the “Network” dialogue box, click on the “Identification” folder.

17

Enter your “Computer Name,” “Workgroup,” and “Computer 
Description.” And click on “Close.” (If you do not have a Computer name, 
Workgroup name and Computer description, contact your network 
administrator)

18

At the “Insert Disk” notification, click on “OK.”

19

Set the path to your Windows 95 SR2 media and click on “OK.” 
(If you have an HP preloaded HDD, the media is located at 
C:\Masters\Win95\System\Cabs\)

20

When prompted, insert the 3C900 driver’s disk 2 of 2 and click on “OK.”

21

Set the path to “A:\” and click on “OK.” (If you have an HP pre-loaded 
HDD, set the path statement to “C:\LANDRV\3C900\Disk2\”)

22

Click on “YES” to complete installation and restart the machine.

Summary of Contents for Vectra VL6 6









































Reviews: