3 Connecting to a Windows NT Server 3.51
Windows 95 SR2
Windows 95 SR2
Requirements
•
HP Vectra with Windows 95 SR2.
•
IBM AUTO LANStreamer PCI card and drivers disk.
•
Driver Name for Vectra VL8 and VL7: W95setup.inf Size: 40KB Date: 9/
17/96.
•
Driver Name for Vectra VE7/VE8: Streamer.vxd Size: 80KB Date: 9/13/96.
•
Microsoft Windows NT Server 3.51 machine that supports Net BEUI, TCP/
IP, NWLink IPX/SPX, and NWLink NetBIOS transfer protocols.
Device Configuration
Procedure
1
With the HP Vectra turned off install the IBM LANStreamer 16/4 PCI TR
adapter card into a PCI slot.
2
Insert the IBM LANStreamer TR drivers disk 2 of 5 (AUTO LANStreamer
PCI Diagnostic Disk) and power on the machine.
3
After the machine boots, verify that the adapter finished testing and that
the adapter is “OK.”
4
Click on “F3” to exit, and then press “CTRL+ALT+DEL.”
5
When Windows 95 restarts a message will appear that new hardware has
been found.
6
Insert disk , 4 of 5, IBM Auto LANStreamer driver diskette.
7
Click the “Next” button to begin hardware wizard.
8
Click on “Other Locations” in the “Update Device Driver Location” dialog
box, and set path to “A:\WIN95” then click “OK”
(If you have an HP pre-loaded HDD, set the path statement to
“C:\MASTERS\LANDRV\LNSTRM\DISK4\WIN95\”).
9
“IBM Auto LANStreamer PCI Adapter(NDIS3)” should now be listed.
Vectra VL8
Vectra VL7
Vectra VE7/VE8
I/O Base Address
F800h
C800h
DC00h
Interrupt Request
Level
11
11
10(11)
Summary of Contents for Vectra VL6 8
