Installing Windows NT 3.51 WS
2
4
Restart your system and press
to enter the Setup program.
5
In the Setup program, highlight
Operating System
and select
Windows NT
. Press the
key to save the setting and exit the Setup
program.
6
When your system restarts, it will start (boot) from the inserted
diskette. Follow the displayed instructions to copy the files needed
for an installation of Windows NT.
7
Remove the disk and CD-ROM from your computer when the files
have been copied from the CD-ROM disk to the
duplicate
diskette.
Installing Windows NT
Please refer to the MS Windows NT Workstation 3.51 manual for
detailed explanations about the installation process.
Before installing Windows NT, make sure you have these disks:
•
Windows NT Setup disks
(Setup Boot disk, Setup disk #2, and Setup disk #3)
•
Windows NT CD-ROM
•
Duplicate
Boot
diskette.
1
Insert the Windows NT “Setup Boot Disk” into drive
A
and insert the
Windows NT CD-ROM in the CD-ROM drive. Restart your system.
2
Insert “Setup Disk #2” when prompted by the installation program.
3
Press
to
setup
Windows
NT.
4
Press
to
select
the
Express Setup
.
NOTE
If you are installing the US English version of Windows NT with a
localized (non-US English) keyboard, you should choose the
Custom
Setup
. The Custom Setup gives the option of selecting a localized
keyboard.
5
Insert “Setup Disk #3” when prompted by the installation program.
6
When the installation program reports that the IDE CD-ROM has
been detected as a mass storage device, press
S
to specify an
additional device.
Summary of Contents for VECTRA XW
Page 16: ...Installation von Windows NT 3 51 WS 14 ...
Page 35: ......
Page 36: ...Printed in France 08 96 Part Number D4514 90931 50 ...