Installing Windows NT 3.51 WS
3
7
Select
Other
by pressing
. Insert the duplicate
Boot
disk,
and then press
.
8
Press
to select the displayed Adaptec driver and then press
to continue the installation.
9
Remove the duplicate
Boot
disk and insert the Windows NT “Setup
Disk #3”.
10
Press
to install Windows NT from the CD-ROM. Follow the
instructions displayed by the installation program. (Refer to the
Microsoft Windows NT documentation for detailed installation
instructions.)
11
When asked to insert the
Adaptec 7800 Family Manager Set
driver
diskette, insert the duplicate
Boot
disk and press
to retry.
12
When the files have been copied from the duplicate
Boot
disk,
remove the disk and press
to restart your computer.
13
Follow the instructions displayed by the Windows NT installation
program to continue the installation of Windows NT.
14
When the installation program tries to detect the network adapter,
click
Continue
, then select
Continue
in the next dialog box.
15
Select
No Network
in the
Add Network Adapter
dialog box, then click
OK
to confirm your choice. (The installation of network drivers is
explained in the following section.)
16
Continue the Windows NT installation until a dialog box proposes
the type of display connected to your computer.
17
Click
OK
to select the
VGA Compatible Display
, then click
OK
to save the
configuration.
18
When the installation of Windows NT is complete, click
Restart
Computer
to restart your computer.
Summary of Contents for VECTRA XW
Page 16: ...Installation von Windows NT 3 51 WS 14 ...
Page 35: ......
Page 36: ...Printed in France 08 96 Part Number D4514 90931 50 ...