Installing Windows NT 3.51 WS
6
This guide also contains additional technical information about the
Open GL interface and describes how to configure the drivers for
specific applications.
Installing the Sound driver
To enable the integrated audio interface:
1
In the Control Panel, choose the
Drivers
icon.
2
Click on
Add
.
3
Choose
Creative Labs Sound Blaster 1.x, Pro, 16
from the list and click
OK
.
4
Insert the Microsoft Windows NT CD-ROM in the CD-ROM drive.
5
Confirm the proposed settings in the following dialog box, then click
OK
.
NOTE
The proposed settings will correspond, by default, with the Audio
Interface settings in the HP Setup program. If an error message appears,
check that the proposed settings are the same as those configured in the
Setup program. Refer to the
User’s Guide
for more information about
the Setup program.
Summary of Contents for VECTRA XW
Page 16: ...Installation von Windows NT 3 51 WS 14 ...
Page 35: ......
Page 36: ...Printed in France 08 96 Part Number D4514 90931 50 ...