English
97
4 Troubleshooting Your Personal Workstation and Using the Setup Program
Using the HP Setup Program
Configure/View
Interface Settings Menu
We recommend that these settings are not changed.
SCSI Channel Interface Definitions:
•
Interface SCSI ID
Changes the interface SCSI ID from its default value of 7 (which has
the highest priority on the SCSI bus).
•
SCSI Parity Checking
Enable or disable host adapter SCSI parity checking. You should
disable SCSI Parity Checking if any attached SCSI devices do not
support SCSI parity (most currently available SCSI devices do
support SCSI parity).
Additional Options:
•
Boot Device Options
Press
to display the Boot Device Configuration menu.
•
SCSI Device Configuration
Press
to display the SCSI Device Configuration menu.
•
Advanced Configuration Options
Press
to view the Advanced Configuration Options menu.
SCSISelect(TM) Utility v1.xxx
Configuration
SCSI Bus Interface Definitions
Interface SCSI ID . . . . . . . . . . . . . . . 7
SCSI Parity Checking . . . . . . . . . . . . . . Enabled
Additional Options
Boot Device Options . . . . . . . . . . . . . . Press <Enter>
SCSI Device Configuration . . . . . . . . . . . Press <Enter>
Advanced Configuration Options . . . . . . . . . Press <Enter>
<F6> - Reset to Interface Defaults
Arrow keys to move cursor, <Enter> to select option, <Esc> to exit
Summary of Contents for VECTRA XW
