4 Troubleshooting Your Personal Workstation and Using the Setup Program
Using the HP Setup Program
98
English
Boot Device
Configuration Menu
This menu lets you configure the SCSI boot device. To know the SCSI ID
of a specific SCSI device, you can run the SCSI Disk Utilities. To do this,
select
SCSI Disk Utilities
in the Options menu of the SCSISelect
utility (see page 96).
Use the
and
keys to move between options. Press
to
display a menu with a selection of values.
•
Boot Target ID
This parameter is the SCSI ID of the device to boot on. The default
value is 0.
•
Boot Lun Number
More advanced SCSI drives can have several logical units. This
option indicates the logical unit (or Lun) on which to boot for the
drive chosen in the
Boot Target ID
. The default value is 0.
SCSISelect(TM) Utility v1.xxx
Boot Device Configuration
Please run SCSI Disk Utilities to get present devices
in your system.
Boot Target ID ............................................... 0
Options Listed Below Have NO EFFECT if Multiple Lun Support is Disabled
Boot Lun Number .............................................. 0
Arrow keys to move cursor, <Enter> to select option, <Esc> to exit
Summary of Contents for VECTRA XW
