5
1 Setting Up Your Personal Workstation
Connecting to a Network
Connecting to a Network
Your Personal Workstation has a 100Base-T LAN interface adapter. It
also supports 10Base-T.
The LAN adapter supports both 10 Mbit/s and 100 Mbit/s operations. It
automatically detects which network type is being used.
1
Connect the RJ-45 plug on your network cable to the LAN connector
on the LAN Adapter. Push the plug into the connector until the plug
clicks into place.
2
Attach the other end of the LAN cable to a hub (or into a wall jack
that is connected to a hub).
Let your Network Administrator know you are connecting your
Personal Workstation to the network. Refer to the online Network
Administrator Guide (provided with the driver kit) for instructions
on setting up your Personal Workstation for a LAN connection.
Base-T Interface
Summary of Contents for VECTRA XW
