3 How to Install Accessories Inside Your Personal Workstation
Installing Accessory Boards
46
English
Installing Accessory Boards
The Personal Workstation has six accessory board slots:
•
Slot AT 1 (the bottom slot) for full-length 16-bit ISA boards
•
Slot AT 2 for full-length 16-bit ISA boards
•
Slot AT 3/PCI 4 for either a full-length 32-bit PCI or a 16-bit ISA
board
•
Slot PCI 3 can be used for a full-length 32-bit PCI board
•
Slot PCI 2 for a full-length 32-bit PCI board
•
Slot PCI 1 (the top slot) for a full-length 32-bit PCI board.
Configuring Plug and
Play with the
Setup
Program
You can use the
Setup
program to select the level of support provided
by the system BIOS for Plug and Play-compatible accessory boards.
1
Turn on the Personal Workstation and press
when
<Setup=F2>
appears.
2
Highlight the
PnP Board Activation
line and use
or
to
select
Full
.
When
Full
is selected, all Plug and Play accessories will be
initialized by the BIOS. However, you will need to determine a
conflict-free setting for the board.
3
Press
to save your selection and exit from the
Setup
program.
Summary of Contents for VECTRA XW
