English
81
4 Troubleshooting Your Personal Workstation and Using the Setup Program
If Your Personal Workstation Has a Software Problem
If Your Personal Workstation Has a Software Problem
If You Have Forgotten Your Password
❒
If you forget the User Password and the System Administrator
Password is set and known:
1
Restart the Personal Workstation. If the keyboard is locked,
unplug the power cord and plug it in again.
2
Wait for the message
<F2=Setup>
.
3
Press
to
start
Setup
.
4
Type the
System Administrator Password
to enter
Setup
.
5
Highlight the
User Password
field and set a new User Password.
6
Press
to save the new User Password and exit
Setup
.
❒
If you forget both the User Password and the System Administrator
Password:
1
Switch off the Personal Workstation and remove the computer’s
cover (refer to chapter 3).
2
Set switch 2 (PSWRD) on the system board switch block to ON
(refer to chapter 5 for the switch location).
3
Replace the Personal Workstation’s cover and switch it on. Allow
it to complete its startup routine.
4
Switch off the Personal Workstation and remove the cover.
5
Reset switch 2 (PSWRD) to OFF.
6
Replace the computer’s cover (refer to chapter 3).
7
Switch on the Personal Workstation and allow it to complete its
startup routine.
8
Press
when prompted to use Setup.
9
Set new User and System Administrator Passwords.
10
Press
to save the new passwords and exit
Setup
.
Summary of Contents for VECTRA XW
