Service and Technical Reference Guide, xw3100
338611-001
5–23
Removal and Replacement Procedures
5.11 Front I/O Devices
1. Prepare the workstation for disassembly (Section
5.1
).
2. Remove the workstation access panel (Section
5.5
).
3. Disconnect the two I/O device cables from the system board: the front USB cable pair and
the front audio cable.
4. Remove the power supply from the chassis (Section
5.17
).
5. From the inside of the chassis, remove the two screws that secure the I/O device to the
chassis
1
, then pull the device into the chassis
2
to free it from its mount.
To install the housing assembly, reverse the removal procedures.
Summary of Contents for Workstation xw3100
