22. Click
Next
.
The
Create LDEVs
window appears. Go to
to create LDEVs.
If
Subscription Limit
of the created pool is set to 0%, the
Create LDEVs
window does not appear.
Click
Finish
and the
Confirm
window appears.
23. In the
Confirm
window, click
Apply
to register the setting in the task.
If you select a row and click
Detail
, the
Pool Properties
window appears.
If the
Go to tasks window for status
checkbox is selected, the
Tasks
window appears.
For Smart Tiers pool when selecting pool-VOLs automatically
To create pools by selecting pool-VOLs automatically:
1.
In the
Storage Systems
tree on the left pane of the top window, select
Pool
.
The
Pool
window appears.
2.
Click
Create Pools
.
The
Create Pools
windows appears.
3.
From the
Pool Type
list, select
Thin Provisioning
.
4.
From the
System Type
list, select
Open
.
5.
From the
Smart Pool
field, select
Enable
.
CAUTION:
You cannot select
Enable
if the storage system has only external volumes with
the
Cache Mode
set to
Disable
.
6.
From the
Pool Volume Selection
field, select
Auto
.
7.
Follow the steps below to select pool-VOLs.
1.
From the
Resource Group list
, select the resource group name of the pool.
2.
From the
Performance
list, select the performance of the pool.
3.
In the
Total Capacity
list, specify the capacity of the pool.
Values are displayed in
Total Pool Volumes
and
Total Capacity
. These values are greater
than the specified value of the pool capacity. If you change the pool configuration, perform
steps d, e, and f.
4.
Click
Change Pool Configuration
.
The
Change Pool Configuration Pattern
window appears. You can change the pool
configuration that is automatically selected.
5.
From the
Pool Configuration Patterns
table, select the pool configuration row. Then click
Select
Working with pools
129
