The Insight Diagnostics Test feature provides the capability to test functionality of all the major hardware
components in the system. The Test feature is designed with flexibility to enable you to customize test
selections by specifying different modes and types of testing.
A Quick Test provides a predetermined script where a sample of each hardware component is tested
and requires no user intervention.
A Complete Test provides a predetermined script during which each hardware component is fully tested.
You can select Interactive or Unattended tests. This changes the devices tested during the Complete
Test. There are more tests available in the interactive mode, but these require user intervention.
A Custom Test provides the most flexibility in controlling the testing of a system. The Custom Test mode
enables you to specifically select which devices, tests, and test parameters are run. You can select tests
that do not require any user interaction through the Interactive and Unattended tests modes.
Diagnostic utility on CD
HP Insight Diagnostics is available on the Documentation Library CD included with your workstation.
To start the diagnostic utility on the Documentation Library CD:
1.
To enter the Computer Setup (F10) Utility, power on your workstation and press
F10
during the
initial boot process .
2.
Select your language from the list and press the
Enter
key. In the Computer Setup Utilities menu,
four headings are displayed:
File
,
Storage
,
Security
, and
Advanced
. There might be other
headings, depending on your workstation.
3.
Use the right arrow key to select
Storage
.
4.
Use the down arrow key to select
Boot Order
, and then press
Enter
.
5.
Select
CD-ROM Drive
, and then press
F5
to enable it as a bootable device. (If the CD drive is not
already enabled, pressing
F5
again disables it.) The default setting is Enabled.
6.
Set the optical drive at the top of the boot order. To do this, select
CD-ROM
, press the
Enter
key,
and then use the up arrow to move it to the top of the boot order.
7.
To apply and save changes, press the
F10
key, and then select
File>Save Changes
and
Exit.
8.
Insert the Documentation Library CD into the workstation.
9.
Restart your system and HP Insight Diagnostics launches automatically.
Downloading the latest diagnostic utility
1.
Go to
http://www.hp.com
.
2.
Select the
Support & Drivers
link.
3.
Select the
Download driver and software
radio button.
4.
Enter your product number (for example, xw4600) in the text box, and then press
Enter
.
5.
Select your operating system.
6.
Select the
Diagnostic
link.
7.
Locate
HP Insight Diagnostics Offline
and select
Download.
8.
After the .iso file is downloaded, create an image on an optical medium (such as a CD).
126 Chapter 5 System diagnostics and troubleshooting
ENWW
Summary of Contents for Xw6600 - Workstation - 2 GB RAM
