background image

EL-MF877-00 
Template Revision B 

Page    1 

PSG instructions for this template are available at 

EL-MF877-01

 

 

 

 

 

Product End-of-Life Disassembly Instructions

 

Product Category: Monitors and Displays

 

Marketing Name / Model

 

[List multiple models if applicable.]

 

HP Z27n G2 27-inch Monitor 

 
 

Purpose: 

The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions 

for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU 
directive 2012/19/EC, Waste Electrical and Electronic Equipment (WEEE). 
NOTE: Recyclers should sort plastic materials into resin streams for recycling based on the ISO 11469 plastic marking code on 
the plastic part. For any questions on plastic marking, please contact

 

HP’s Sustainability Contact

.   

 

 

1.1 Items listed below are classified as requiring selective treatment. 
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as 
applicable. 

 

 

Item Description

 

 

Notes

 

Quantity 
of items 
included 
in product

 

Printed Circuit Boards (PCB) or Printed Circuit 
Assemblies (PCA) 

With a surface greater than 10 sq cm 

Batteries 

All types including standard alkaline and lithium 
coin or button style batteries 

Mercury-containing components 

For example, mercury in lamps, display backlights, 
scanner lamps, switches, batteries 

Liquid Crystal Displays (LCD) with a surface 
greater than 100 sq cm 

Includes background illuminated displays with gas 
discharge lamps 

Cathode Ray Tubes (CRT) 

 

Capacitors / condensers (Containing PCB/PCT) 

 

22 

Electrolytic Capacitors / Condensers measuring 
greater than 2.5 cm in diameter or height 

 

External electrical cables and cords 

 

Gas Discharge Lamps 

 

Plastics containing Brominated Flame Retardants 
weighing > 25 grams (not including PCBs or PCAs 
already listed as a separate item above) 

 

 

Components and parts containing toner and ink, 
including liquids, semi-liquids (gel/paste) and toner 

Include the cartridges, print heads, tubes, vent 
chambers, and service stations. 

Components and waste containing asbestos 

 

1.0 Items Requiring Selective Treatment

 

Summary of Contents for Z27n G2









Reviews: