EL-MF877-00
Template Revision A
Page 3
678155-001 (HP Z620 Workstation Disassembly Instructions)
8.
Remove the graphics card and any other expansion cards. Push down on the expansion card
retention clamp levers (1) on the outside of the chassis to open the retention clamp as shown
below.
Release the card slot latch (
2
)
, and then carefully lift the card from the chassis (3).
9.
Remove the power supply. Pull out the power supply locking handle marked with the green
tab. Use the handle to pull the power supply out of the chassis
.
10.
Remove all components from the workstation.
