4
Technical white paper | HP ZBook 15 G2 Mobile Workstation
5. Use the up and down arrow keys to select Secure Boot, then use the left and right arrow keys to change the setting
to Disable.
6. Use the up and down arrow keys to select Legacy Support, then use the left and right arrow keys to change the
setting to Enable.
7.
Press F10 to accept the changes.
8. Press F10 again, then press Enter twice to restart the computer.
9. As soon as the computer starts, a message may appear indicating that the boot mode has changed.
10. If this message does appear, type the four-digit code shown in the message, then press Enter to confirm the change.
NOTE: No text field displays for the code. This is expected behavior. When you type the numbers, the code is logged
without a text field
Recommendations
• For large scale deployment, the best answer is to order systems with Windows 7 (including Windows 7 with Windows
8/8.1 license) – these will come with the BIOS set properly for Windows 7.
• Custom Integration Services (CIS) can load custom images for deployment in over 100 countries, worldwide, so each
unit is configured exactly the same and ready to run when it arrives at the customer location (more on CIS).
