80
Operator's Manual
B 235 Evo
Head assembly (Fig.3/3a/3b)
- loosen the screws M8 (A, Fig.3) that fasten the head to the body on the rear side of the
machine;
3
- turn the head to a vertical position and position it on the weight tray cover as shown in
the figure 3a placing the cables inside the machine;
3a
- fix the head by first tightening the two screws A and then the two screws B shown in
the previous figure;
- Fit the closing plate for the weight tray cover A using the supplied screws B (Fig.3b).
